Conference Program

09:00 am-09:15 am

Opening Ceremony – Welcome by the Chairmen of the Conference

09:15 am-09:45 am

Keynote Lecture: Prof. Ehrenfried Zschech, Fraunhofer Institute for Ceramic Technologies and Systems IKTS

3D imaging of cracks in composites and microchips using high-resolution XCT

09:45 am-10:15 am

Keynote Lecture: Dr. Natalia Konchakova, Helmholtz-Zentrum Hereon

Modelling Supported Design of New Active Protective Coatings

10:15 am-10:30 am

Coffee Break

10:30 am-12:30 pm

SESSION 1

Workshop on Non-Destructive Testing and Structural Health Monitoring for prevention of failure

Chairperson: Prof. Elena Jasiuniene, Kaunas University of Technology

SESSION 2

Crack propagation in materials and crack-stop engineering

Chairperson: Prof. Ehrenfried Zschech, Fraunhofer Institute for Ceramic Technologies and Systems IKTS

SESSION 3

Theoretical and experimental approaches for the robust design of materials and components

Chairperson: Prof. Vincenzo Tucci, University of Salerno

SESSION 4

Materials Surface Processing for Engineering applications

Chairpersons: Prof. Dimitris Mataras – Prof. Costas Galiotis, University of Patras

10:30 am-10:50 am

Air-coupled ultrasonic measurement of in-plane elastic properties of a non-uniform MICA paper

Justina Sestoke, 1, Reimondas Sliteris ,1    

1 Prof. Kazimieras Barsauskas Ultrasound Institute

Crack propagation in metal-ceramic and metal-metal nanolaminates

Jon Molina-Aldareguia, 1,                      

1 Imdea Materials Institute

INVITED TALK

Putting Stiffness where it’s needed: Optimizing the Mechanical Response of Multi-Material Structures

Arouna Patouossa Mounchili, 1, Stefan Bosse ,1, Dirk Lehmhus, 2, Adrian Struss, 2,               

1 University of Bremen

2 Fraunhofer IFAM

Record Terahertz shielding behavior of lightweight CVD graphene nanolaminates

Christos Pavlou, 1,2, Maria Giovanna  Pastore Carbone ,1, Anastasios Manikas, 2, George Trakakis, 1, Can   Koral ,3, Gianpaolo  Papari, 4, Antonello   Andreone ,3,4, Costas  Galiotis ,1,2, 

1 FORTH ICE-HT

2 Department of Chemical Engineering, University of Patras

3 INFN Naples Unit

4 Department of Physics, University of Naples “Federico II”

10:50 am-11:10 am

Influence of cutting parameters on surface integrity in BTA deep hole drilling of steel components

Simon Strodick, 1, Robert Schmidt ,2, Andreas Zabel, 2, Dirk Biermann, 2, Frank  Walther ,1,           

1 Department of Materials Test Engineering (WPT), TU Dortmund University

2 Institute of Machining Technology (ISF), TU Dortmund University

Multifunctional Ceramic/Graphene Thick Coatings for New Emerging Applications

Katalin Balázsi, 1, Zhongquan Liao, 2, Jan Dusza, 3, Ehrenfried Zschech, 2, Csaba  Balázsi ,1,           

1 Centre For Energy Research, ELKH, Hungary

2 Fraunhofer Institute for Ceramic Technologies and Systems IKTS

3  Institute of Materials Research, Slovak Academy of Sciences

Probabilistic strength assessment through analytical modeling of pillars found in ship structures

Angelos Vasileiou, 1, Konstantinos Anyfantis ,1,                   

1 National Technical University of Athens

Production and applications of superlubric graphene coatings

George Paterakis, 1,2, Charalampos Androulidakis ,1,2, Emmanuel Koukaras, 3, George Trakakis, 2, George  Anagnostopoulos2, Costas Galiotis, 1,2,         

1 Department of Chemical Engineering, University of Patras

2 Institute of Chemical Engineering Sciences, Foundation of Research and Technology-Hellas (FORTH/ICE-HT)

3 3Laboratory of Quantum and Computational Chemistry, Department of Chemistry, Aristotle University of Thessaloniki

11:10 am-11:30 am

Integration and evaluation of a meander-shaped fiber-optical sensor in a GFRP leaf spring

Andreas Preisler, 1, Friedrich Wolf-Monheim ,2, Rainer Souschek, 2, Dominik Kaiser, 3, Ralph  Wojtczyk ,4, Athanasios Dafnis, 1, Kai-Uwe  Schröder ,1, Wolfgang  David ,2, Paul  Zandbergen ,2

1 RWTH Aachen University, Institute of Structural Mechanics and Lightweight Design

2 Ford Research & Innovation Center Aachen

3 SGL Composites GmbH

4 SGL Technologies GmbH

Phase-Field Modeling of Fracture in Cr-Al₂O₃ Metal–Ceramic Composites with Experimental Verification

Hossein Darban, 1, Kamil  Bochenek ,1, Witold  Węglewski, 1, Michał  Basista, 1,               

1 Institute of Fundamental Technological Research (IPPT), Polish Academy of Sciences

A  design tool for the tuning of carbon-based nanocomposites material properties

P. Lamberti,1, L. Melillo,1, A. Kukhta,2, V. Tucci,1, and V. Georgiev,3

1 University of Salerno

2 Belarusian State University

3 NanoTech Lab Ltd

Enhancement of damping response in polymers and composites by the addition of graphene nanoplatelets

Panagiotis Nektarios Pappas, 1, Christos Katsiropoulos ,1,2, Nikolaos  Koutroumanis, 1, Anastasios Kokkinos, 3, Costas  Galiotis ,2,           

1 Foundation for Research and Technology Hellas, Institute of Chemical Engineering and High Temperature Chemical Processes, University of Patras, Greece

2 Department of Chemical Engineering, University of Patras, Greece

3 Department of Ethnomusicology, Ionian University, Greece

11:30 am-11:50 am

Percolation Threshold Sensors for reducing complexity in Structural Health Monitoring (SHM) of engineering structures

Helge Pfeiffer, 1, Sevilia Sunetchiieva ,1, Martine Wevers, 1,                 

1 Ku Leuven

Diffusion phenomena at the interface zone of A1050/Ni201 explosively welded clads leading to disintegration of the weld

Izabella Kwiecien, 1, Joanna Wojewoda-Budka ,1,                   

1 Institute of Metallurgy and Materials Science Polish Academy Of Sciences

INVITED TALK

Robust design of multilayer RF devices based on graphene

M. La Mura, 1, P. Lamberti,1,  V. Tucci, 1, and P. Kuzhir, 2

1 University of Salerno

2 University of Eastern Finland

Plasma enhanced chemical vapor deposition of hydrophobic, hydrophilic and amphiphilic coatings

Ergina Farsari, 1, Eleni Anna Kostopoulou ,1, Vasiliki Eleftheria Vrakatseli, 1, Eleftherios  Amanatides, 1, Dimitrios   Mataras ,1,           

1 University Of Patras

11:50 am-12:10 pm

Model-Based Structural Health Monitoring of Box Girders

Nicholas Silionis, 1, Konstantinos Anyfantis ,1,                   

1 School of Naval Architecture and Marine Engineering, National Technical University of Athens

A customized electrical potential difference method for in situ monitoring of propagating cracks using a stochastic algorithm

E Skrinis, 1, Christos Kalligeros ,1, Antonios Tsolakis, 2, Vasilios Spitas, 1,                

1 School of Mechanical Engineering, National Technical University of Athens

2 Department of Mechanical Engineering, School of Engineering, University of West Attica

Electromechanical performances variability of Capacitive Micromachine Ultrasonic Transducers (CMUTs) by FEM modeling.

M.La Mura, 1, P. Lamberti,1 , A. S. Savoia, 2,

1 University of Salerno

2 Roma Tre University

Plasma Enhanced Chemical Vapor Deposition of SiOx-like thin films for corrosion protection of light metals

Eleftherios Amanatides, 1, Charalampos Voulgaris ,1, Dimitrios Mataras, 1,                 

1 University of Patras

12:10 pm-12:30 pm

Comparison of immersion and air-coupled ultrasonic testing techniques for evaluation of quality of the adhesively bonded joints

Aadhik Asokkumar,1, Bengisu Yilmaz ,1, Elena Jasiūnienė, 1,2, Rymantas Jonas Kažys, 1,               

1 Prof. K. Baršauskas Ultrasound Research Institute, Kaunas University of Technology

2 Department of Electronics Engineering, Kaunas University of Technology

In-situ examinations of nano- and microscale fatigue and fracture in device-relevant materials

Douglas Stauffer, 1, Eric Hintsala ,1, Sanjit Bhowmick, 1, Syed Asif, 2, Oden  Warren ,1,           

1 Bruker Corporation

2 Industron Nanotechnology Pvt Ltd

INVITED TALK

Design criteria of Strain sensors made of Self-Sensing Nanocomposites for Structural Applications

L.Guadagno, 1, P. Lamberti, 2, V. Tucci ,2, and L.Vertuccio, 1

1 Dept. of Industrial Engineering

University of Salerno

2 Dept. of Information and Electrical Engineering and Applied Mathematics University of Salerno

Plasma processing of metal surfaces: approaches for enhanced corrosion protection

Antonella Milella, 1, Fabio Palumbo ,2, Francesco Fracassi, 1,                 

1 University Of Bari Aldo Moro

2 CNR-NANOTEC

12:30 pm-13:30 pm

LUNCH

13:30 pm-15:30 pm

SESSION 5

Workshop on Non-Destructive Testing and Structural Health Monitoring for prevention of failure

Chairperson: Prof. Elena Jasiuniene, Kaunas University of Technology

CONTINUED

SESSION 6

Mini Workshop on Experimental studies on the relation between microstructure and mechanical fracture processes

Chairperson: Dr. George Pantazopoulos, ELKEME Research and Development Center

SESSION 7

Mini Workshop on Design of Self-responsive Thermosetting Resins for application in Aeronautics

Chairpersons: Prof. Liberata Guadagno - Prof. Roberto Pantani, University of Salerno

SESSION 8

Engineering applications in orthopaedic surgery

Chairpersons: Prof. Andreas Panagopoulos – Dr. Irini Tatani, University of Patras

13:30 pm-13:50 pm

Temper embrittlement of 9%Ni low carbon steel and non-destructive inspection by magnetic Barkhausen noise

Sérgio Souto Maior Tavares, 1,2, Juan Manuel Pardal ,1,2, Fernanda Freitas Neves, 2, Hugo Ribeiro da Igreja, 1, Odivaldo  Cambraia Alves ,1, Leosdan Figueredo Noris, 1,         

1 Universidade Federal Fluminense - UFF

2 Centro Federal de Educação Tecnológica - CEFET/RJ

Examination of Fracture Mechanisms in two Al – Ti – V – Cr – (Si) High Entropy Alloys

Spyridon Chaskis, 1, Dimitrios Kiousis ,1, Paul Stavroulakis, 2, Russell  Goodall, 2, Spyros  Papaefthymiou ,1,           

1 Laboratory of Physical Metallurgy, Division of Metallurgy and Materials, School of Mining and Metallurgical Engineering

2 Department of Material Science & Engineering, The University of Sheffield

Design of smart resins for structural applications

Elisa Calabrese, 1, Marialuigia Raimondo ,1, Liberata Guadagno, 1,                 

1 Department of Industrial Engineering, University of Salerno

Biomechanical testing of metaphyseal-fitting short stems in total hip arthroplasty; Digital image correlation Finite Element Modelling and Analysis Validation

Irini Tatani, 1, Panagiotis Megas ,1, Andreas Panagopoulos, 1, Ioannis Diamantakos, 2, Photios  Nanopoulos ,3, Spyros Pantelakis, 2,         

1 Orthopaedic Department, Patras University Hospital

2  Laboratory of Technology and Strength of Materials, Department of Mechanical Engineering and Aeronautics, University of Patras,

3 Department of Computer Engineering & Informatics, University of Patras,

13:50 pm-14:10 pm

Acoustic emission monitoring of composite plates under bending – dimension effect

Nicolas Ospitia, 1, Eleni Tsangouri ,1, Dimitrios Aggelis, 1,                 

1 Vrije Universiteit Brussel

Comparative Study of Microstructural Evolution and Mechanical Properties of Inconel® 718 and Waspaloy® Welds

Angelos Kaldellis, 1, Anastasia Alexandratou ,1, A. E. Kladis, 1, Stavros Deligiannis, 1, Petros  Tsakiridis ,1, George Fourlaris, 1,         

1 Lab of Physical Metallurgy and Center for Electron Microscopy, School of Mining and Metallurgical Engineering, National Technical University of Athens

Development of anti/de-icing graphene-based epoxy systems

Fabiana Foglia, 1, Liberata  Guadagno ,1, Roberto Pantani, 1, Luigi  Vertuccio, 1,               

1 Department of Industrial Engineering, University of Salerno, Via Giovanni Paolo II, Fisciano (SA) Italy

Biomechanical testing and FEA of orthopaedic implants for fracture fixation

Giorgos Kyriakopoulos, 2, Giorgos Anastopoulos ,2, Panagiotis Megas, 1, Stavros Kourkoulis, 3, Andreas  Panagopoulos ,1,           

1 Patras University Hospital

2 1st Dpt of Orthopaedics and Trauma, General Hospital of Athens G.Gennimatas

3 Department of Mechanics, School of Applied Mathematical and Physical Sciences, National Technical University of Athens

14:10 pm-14:30 pm

Crack detection in concrete bridges using Deep Convolutional Neural Networks

Hajar Zoubir, 1, Mustapha Rguig ,1, Mohamed Elaroussi, 1,                 

1 Ecole Hassania des Travaux Publics

Effect of the small punch test sample geometry on the liquid metal embrittlement of Cu-30 %Zn by the eutectic Ga-In

Marco Alejandro Ezequiel Alvarado, 1, Ingrid Proriol Serre ,1,                   

1 Univ. Lille, CNRS, INRAE, Centrale Lille, UMR 8207 - UMET - Unité Matériaux et Transformations, F-59000

Design of anti/de-icing bulk resins based on the joule heating

Luigi Vertuccio, 1, Roberto Pantani ,1, Liberata  Guadagno, 1, Fabiana Foglia, 1,               

1 Department of Industrial Engineering-University of Salerno

Bioengineering applications in Orthopaedics

George Skarpas, 1, Andreas Panagopoulos ,2, Irini Tatani, 2, Panagiotis Megas, 2,               

1 Hellenic Open University, Orthopaedic Dept. for Sports Injuries & Regenerative Medicine, General Hospital MITERA

2 Orthopaedic Department, Patras University Hospital

14:30 pm-14:50 pm

Α novel infrared thermography approach for automated rapid detection of damage in aeronautical composites.

Spyridoula  Farmaki, 1, Dimitrios A.  Exarchos ,1, Ilias K.  Tragazikis, 1, Theodore E. Matikas, 1, Konstantinos G.  Dassios ,2,           

1 University of Patras

2 University of Ioannina

Effect of a coating type of a cutting tool on surface roughness of machined material during planing

Katarina Monkova, 1,2, Peter Pavol Monka ,1,2,                   

1 Technical University in Kosice, Faculty of manufacturing technologies

2 UTB Zlin, Faculty of technology

Knockdown effect assessment between conventional & 3R composites and their repair efficiency

Maria Kosarli, 1, Georgios Foteinidis ,1, Kyriaki Tsirka, 1, Asier Martinez, 2, Nerea  Markaide ,2, Stefan Weidmann, 3, Alkiviadis  Paipetis ,1,     

1 Department of Materials Science & Engineering, University Of Ioannina

2 Polymers and Composites, CIDETEC

3 Manufacturing science, Institut für Verbundwerkstoffe GmbH

Patient specific implants and 3-D printing in Orthopaedics

Olga Savvidou, 1, Stavros Goumenos ,1, Ioannis Trikoupis, 1, Ioannis Zafiris, 1, Dimitra  Melissaridou ,1, Pavlos Gerasimidis, 1, Emmanouil  Kalfagianis ,1, Panayiotis  Papagelopoulos  

1 National and Kapodistrian University of Athens

14:50 pm-15:10 pm

Characterization of single-lip deep drilled samples by means of in-situ eddy-current measurements

Nikolas Baak, 1, Jan Nickel ,2, Dirk Biermann, 2, Frank Walther, 1,               

1 Department of Materials Test Engineering - TU Dortmund University

2 Institute of Machining Technology - TU Dortmund University

Grubbs-type catalysts at molecular level in self-healing epoxy resins for aerospace applications

Annaluisa Mariconda, 1, Simona Russo ,2, Pasquale Longo, 2,                 

1 University Of Basilicata

2 University of Salerno

Quantitative evaluation of knee and shoulder dysfunction using Inertial sensor technology

Chr. Yiannakopoulos, 1, I. Vlastos ,1, G.  Kallinterakis, 1, E.  Gianzina, 1, E.   Rousanoglou ,1,           

1 School of Physical Education & Sport Science, National & Kapodistrian University of Athens

15:10 pm-15:30 pm

A Review of Computer Vision Techniques in the Detection of Metal Failures

 

Deborah Fitzgerald, 1, Roselita Fragoudakis ,1,                    

1 Department of Mechanical Engineering, Merrimack College
 

A Leakage Problem in Hot Water System of a Building
 

Erhan Ulvan, 1, Kairong Zhang ,1,                    

1 Acuren Group Inc.
 

15:30 pm-15:45 pm

Coffee Break

15:45 pm-17:45 pm

SESSION 9

Workshop on Non-Destructive Testing and Structural Health Monitoring for prevention of failure

Chairperson: Prof. Elena Jasiuniene, Kaunas University of Technology

CONTINUED

SESSION 10

Mini Workshop on Experimental studies on the relation between microstructure and mechanical fracture processes

Chairperson: Dr. George Pantazopoulos, ELKEME Research and Development Center

CONTINUED

SESSION 11

Mini Workshop on Design of Self-responsive Thermosetting Resins for application in Aeronautics

Chairpersons: Prof. Liberata Guadagno - Prof. Roberto Pantani, University of Salerno

CONTINUED

SESSION 12

Using Computational and Experimental Techniques to Investigate the Role of Extracellular Matrix in the Mechanical Response of Soft Tissue

Chairperson: Prof. Alkiviadis Tsamis, University of Western Macedonia

University of Leicester

15:45 pm-16:05 pm

Impedance spectroscopy as a tool for monitoring the properties in cementitious nancomposite materials with advanced functionalities

Aikaterini Gkaravela, 1, Ioanna Vareli ,1, Nektaria - Marianthi Barkoula, 1, Alkiviadis Paipetis, 1,               

1 University Of Ioannina

Correlation of dominant texture components located near the fracture with the tensile directions

Sofia Papadopoulou, 1,2, Vasilis Loukadakis ,2, Zisimos Zaharopoulos, 2, Spyros Papaefthymiou, 2,               

1 ELKEME

2 National Technical University of Athens

3 ELVAL (ELVALHALCOR ALUMINUM DIVISION)

Certification challenge for self-responsive materials in aeronautics

Raffaele Longo, 1, Giuseppina Barra ,1, Liberata Guadagno, 1,                 

1 University of Salerno

Role of Microstructure in Mechanics and Engineering of Soft Biological Materials

Alkiviadis Tsamis 

University of Western Macedonia, University of Leicester

16:05 pm-16:25 pm

Repair assessment of 3R composites using various NDE techniques and development of online SHM technologies

Georgios Foteinidis, 1, Maria Kosarli ,1, Kyriaki Tsirka, 1, Alaitz Alaitz Ruiz De Luzuriaga, 2, Gema  Solera ,2, Stefan Weidmann, 3, Alkiviadis S.  Paipetis ,1,     

1 Department of Materials Science and Engineering, University Of Ioannina

2 Polymers and Composites, CIDETEC

3 Manufacturing science, Institut für Verbundwerkstoffe GmbH

Failure analysis of metallic components due to improper materials and fabrication method.

Fabienne Delaunois, 1, Alexandre Mégret ,1, Véronique Vitry, 1,                 

1 UMONS

Map of local mechanical properties of anticorrosive graphene-based coatings

Marialuigia Raimondo, 1, Vito Speranza ,1, Roberto Pantani, 1, Carlo Naddeo, 1, Liberata  Guadagno ,1,           

1 Department of Industrial Engineering, University of Salerno

A computational study of mechanical performance of bioresorbable polymer composite stents

Žiga Donik, 1, Branko Nečemer ,1, Srečko  Glodež, 1, Janez Kramberger, 1,               

1 University of Maribor, Faculty of Mechanical Engineering

16:25 pm-16:45 pm

Automated detection-classification of defects on photo-voltaic modules assisted by thermal drone inspection 

Arsenios Gurras, 1, Leonidas Gergidis ,1, Christos Mytafides, 1, Lazaros Tzounis, 1, Alkiviadis  Paipetis ,1,           

1 Department of Materials Science and Engineering

Phase-Field Modeling Of Nugget Zone in Friction Stir Welding

Anna Zervaki, 1, Christos Prosgolitis ,1, Samuel Lambrakos, 2,                 

1 University Of Thessaly

2 Naval Research Laboratory

Multifunctional polymer composite materials with Self-healing & EMI shielding properties

Anastasia Polymerou, 1, Maria  Kosarli ,1, Georgios Foteinidis, 1, Christos Vazouras, 2, Alkiviadis  Paipetis ,1,           

1 Department of Materials Science & Engineering, University of Ioannina, Ioannina 45110, Greece

2 Telecommunications Laboratory, Sector of Combat systems, Naval operations, Electronics and Telecommunications, Hellenic Naval Academy, Piraeus 18539, Greece

Shape and Pattern in Biological System – Classifying Aortic Geometry from Clinical Data

Luka Pocivavsek, 1, Kameel Khabaz ,1, Seth Sankary, 1, Ross Milner, 1,               

1 The University of Chicago

16:45 pm-17:05 pm

Study of modified CNTs dispersions with the use of Electrical Impedance Spectroscopy

Angeliki Eirini Dimou, 1, Nikolaos Alexopoulos ,1, Georgios Maistros, 2, Konstantina Kotsala, 1, Georgios  Binis ,1, Georgios Asimakopoulos, 3, Ioannis  Karatasios ,4,     

1 Department of Financial and Management Engineering, University Of The Aegean

2 ADVISE

3 Department of Materials Science & Engineering,University of Ioannina

4 Institute of Nanoscience and Nanotechnology, National Centre for Scientific Research "Demokritos"

Numerical and experimental study for AM50 magnesium alloy under dynamic loads

Iulian-Ionuț  Ailine, 1, Sergiu-Valentin Galatanu ,1, Cosmin Ioan  Onea, 1, Liviu  Marșavina, 1,               

1 University Politehnica Timisoara

Bioinspired Cementitious-Polymer Composite for Increased Energy Absorption

Trevor Painter, 1, Emily Schwab ,1, Nicole MacCrate, 1, Alexander Brand, 1, Eric  Jacques ,1,           

1 Virginia Polytechnic Institute and State University

Remodeling of collagen fibers in bowel tissues induced by anastomotic geometry

Nhung Nguyen, 1, Brian Fleischer1, John Alverdy, 1, Luka Pocivavsek, 1,               

1 The University of Chicago

17:05 pm-17:25 pm

Simulation of the mechanical behavior of Self-healing Composite materials

Evgenia Madia, 1, Panagiota Polydoropoulou ,1, Spiros Pantelakis, 1, Konstantinos Tserpes, 1,               

1 University of Patras

Flux-driven and external-pressure-driven finite element models replicating pressure-volume hysteresis of small airways and daughter branches in the lung.

James Campbell, 1, Salman Siddiqui ,2, Simon Gill, 1, Alkiviadis Tsamis, 1,               

1 School of Engineering, University of Leicester

2 NIHR, Leicester Respiratory Biomedical Research Unit

17:25 pm-

17:45 pm

Topography induced de-adhesion of a viscoelastic patch off a wrinkling bilayer

Nhung Nguyen, 1, Sachin Velankar ,2, Edith Tzeng, 3, Enrique Cerda, 4, Luka  Pocivavsek ,1,           

1 The University of Chicago

2 University of Pittsburgh

3 University of Pittsburgh Medical Center

4 Universidad de Santiago de Chile

17:45 pm

End of Day 1

09:00 am-09:30 am

Keynote Lecture: Prof. Gregory Haidemenopoulos, University of Thessaly

Towards cyberalloys: computational alloy and process design

09:30 am-09:40 am

Coffee Break

09:40 am-11:40 am

SESSION 13

Workshop on Properties and characterization of high strength materials and components for engineering applications

Chairpersons: Prof. Michael Vormwald - Prof. George Savaidis, Technische Universität of Darmstadt (TUDa) - Aristotle University of Thessaloniki

SESSION 14

Integrated Computational Materials Engineering (ICME) - The case of steels.

Chairperson: Prof. Gregory Haidemenopoulos, University of Thessaly

SESSION 15

Mini Workshop on Environmental degradation, corrosion and wear

Chairperson: Prof. Angeliki Lekatou, University of Ioannina

SESSION 16

Manufacturing of composite materials - Process simulation and mechanical characterization

Chairpersons: Prof. Antoniomaria Di Ilio - Dr. Antonios Stamopoulos, University of L'Aquila

09:40 am-10:00 am

Multiaxial cyclic deformation and life-prediction models for super-elastic NiTi shape memory alloys

Di Song, 1,2,3, Chao Yu ,4,                   

1 Materials Mechanics Group, Department of Civil and Environmental Sciences, Technical University of Darmstadt

2 School of Mechanical and Electrical Engineering, University of Electronic Science and Technology of China

3 Institute of Electronic and Information Engineering of UESTC in Guangdong

4 School of Mechanics and Engineering, Southwest Jiaotong University

Process Design and Optimization of HSLA Steels using Mesoscale Modeling

Maria-Ioanna Tzini, 1, Gregory Haidemenopoulos ,1,                   

1 University of Thessaly, Department of Mechanical Engineering

Electrochemical Corrosion of 2707 Hyper-Duplex Stainless Steel

Anna Zervaki, 1, Alexandra Faka ,1, Kleanthis Karagiannis, 1, Spyros Kleftakis, 2, Angeliki  Lekatou ,2,           

1 University Of Thessaly

2 University of Ioannina

Experimental characterization of fabrication effects on the shear properties of thermoplastic composites in high and sub-zero temperatures

Luca Glauco Di Genova, 1, Antonios G. Stamopoulos ,1, Antoniomaria Di Ilio, 1,                 

1 Department of Industrial and Information Engineering and Economics (DIIIE), University of L’Aquila, Monteluco di Roio, 67100

10:00 am-10:20 am

Impact of structural uncertainties on the buckling strength of cylindrical GLARE panels subjected to uniform compression

Costas Kalfountzos, 1, George Bikakis ,1, Efstathios Theotokoglou, 1,                 

1 National Technical University Of Athens

Robust optimization for alloy and process design of medium Mn steels

Ioannis Aristeidakis, 1, Gregory N. Haidemenopoulos ,1,                   

1 Department of Mechanical Engineering, University of Thessaly

Effect of heat treatments on the corrosion behaviour of Al-5Mg layers deposited on Al6061 by wire-arc additive manufacturing

A.G. Lekatou, 1, A. Gogolos,1,  A.K. Sfikas,2, Amin S. Azar,3, S. Diplas,3

1 University of Ioannina

2 University of Brunel

3 Sintef

Experimental and numerical analysis of the defects induced by the thermoforming process on woven textile thermoplastic composites for automotive applications

Antonella Gaspari, 1, Giulio D'Emilia ,1, Emanuela Natale, 1, Antonios Stamopoulos, 1, Antoniomaria  Di Ilio ,1,           

1 University Of L'aquila

10:20 am-10:40 am

On the applicability of cyclic and fatigue parameters estimation methods to high strength steels

Robert Basan, 1, Tea Marohnić ,1,                   

1 University of Rijeka, Faculty of Engineering

Phase-field simulation of the evolution of retained austenite during processing of low alloy TRIP steels

Marianna Tzini, 1, Peter Christodoulou ,2, Alexis Kermanidis, 2, Gregory Haidemenopoulos, 1,               

1 Laboratory of Materials, Department of Mechanical Engineering, University of Thessaly

2 Laboratory of Mechanics and Strength of Materials, Department of Mechanical Engineering, University of Thessaly

Visualisation of Thermally Sprayed Coating Properties on the Surface of Complex Parts: Experiments & Simulations

Spyros Kamnis, 1, Konstantinos Delibasis ,2, Maria Tzinava, 2,                  

1 Castolin Eutectic-Monitor Coatings, R&D Department

2 University of Thessaly, Department of Computer Science and Biomedical Informatics 

Uncertainty identification of composite properties via inverse approaches: methods and virtual setups

Georgios Balokas, 1, Roberto  Frias Nerio ,1, Benedikt Kriegesmann, 1,                 

1 Hamburg University Of Technology (TUHH)

10:40 am-11:00 am

Microstructural Characterization of AlCrTiV – Si High Entropy Alloy for advanced applications

Ioannis  Daskalopoulos, 1, Spyridon  Chaskis ,1, Marianthi  Bouzouni, 2, Paul Stavroulakis, 3, Russell   Goodall ,3, Spyros Papaefthymiou, 1,         

1 Laboratory of Physical Metallurgy, Division of Metallurgy and Materials, School of Mining and Metallurgical Engineering

2 Department of Physical Metallurgy and Forming, Hellenic Research Centre for Metals (ELKEME S.A.)

3 Department of Material Science & Engineering, The University of Sheffield

Constitutive Modeling of BBC Single Crystals: Non-Schmid stresses and computational issues

Ilias Bellas, John L. Bassani ,3, Nikolaos Aravas, 1,2,                 

1 Department of Mechanical Engineering, University of Thessaly

2 International Institute for Carbon Neutral Energy Research (WPI-I2CNER)Kyushu University

3 Department of Mechanical Engineering and Applied Mechanics, University of Pennsylvania

Effect of pH and fly ash on the electrochemical performance of 316L stainless steel concrete reinforcement in saline environments

S. Tsouli,1, P. Goutzos, S. Kleftakis, A.G. Lekatou,1,

1 University of Ioannina

A Novel Polymeric Composite Material for Thermal Shield Applications – Fabrication and Flammability Characterization

 

Gianluigi Creonti, 1, Gianluca  Falleti   Luciano  Matera                 

1 Crossfire Srl

2 Nanoprom Srl

11:00 am-11:20 am

On the effects of heat and surface treatment on the fatigue performance of high-strength leaf springs

Michail Malikoutsakis, 1, Christos Gakias ,1, Ioannis Makris, 1, Peter Kinzel, 2, Eckehard  Müller ,3, Maria Pappa, 1, Nikolaos  Michailidis ,1, Georgios  Savaidis ,1, 

1 Aristotle University Thessaloniki

2 SOGEFI HD SUSPENSIONS Germany GmbH

3 University of Applied Sciences of Bochum

Thermodynamic and kinetic study of intercritical annealing of DP 1000 Steel

Eleni Kamoutsi, 1, Eleni  Karpouza ,1, Konstantinos Preventas, 1, Georgios Nanas, 1,               

1 University Of Thessaly

Examination of reduced graphene oxide aqueous dispersions with electrical impedance spectroscopy

Christina Margarita Charalampidou,1, Angeliki Eirini  Dimou, 1, Ioanna  Sakellariou, 1, Konstantina  Kotsala, 1, Georgios Maistros, 2, Nikolaos Alexopoulos, 1 

1 Department of Financial Engineering, School of Engineering, University of the Aegean

2 ADVISE E.E.

Thermo-fluidynamic analysis of composite metallic coating on metal foam

Gabriele Baiocco, 1, Daniele Almonti ,1, Erica Menna, 1, Luciano Minardi, 1, Emanuele  Mingione ,2, Nadia Ucciardello, 1,         

1 University Of Rome Tor Vergata

2 University of Campania “Luigi Vanvitelli”

11:20 am-11:40 am

Characterization and performance of high-strength steel 51CrV4 under cyclic loading

Michail Malikoutsakis, 1, Ioannis Makris ,1, Aggelos Pagonas, 1, Maria Pappa, 1, Nikolaos  Michailidis ,1, Georgios Savaidis, 1,         

1 Aristotle University Thessaloniki

Discussion of hardening effects on phase field models of fracture

Aris Tsakmakis, 1, Michael Vormwald ,1,                   

1 Technische Universität Darmstadt

11:40 am-11:50 am

Coffee Break

11:50 am-13:10 pm

SESSION 17

Workshop on Properties and characterization of high strength materials and components for engineering applications

Chairpersons: Prof. Michael Vormwald - Prof. George Savaidis, Technische Universität of Darmstadt (TUDa) - Aristotle University of Thessaloniki

CONTINUED

SESSION 18

Microstructure and properties of aluminum alloys for advanced applications

Chairperson: Prof. Alexis Kermanidis, University of Thessaly

SESSION 19

Mini Workshop on Environmental degradation, corrosion and wear

Chairperson: Prof. Angeliki Lekatou, University of Ioannina

CONTINUED

SESSION 20

Safety aspects in aircraft design

Chairperson: Prof. Andreas Strohmayer,         IFB University of Stuttgart

11:50 am-12:10 pm

Evaluation of the effect of shot size on the residual stresses of shot peened high strength steel 51CrV4 specimens through a 2D FEA model.

Georgios Maliaris, 1, Christos Gakias ,2, Michail Malikoutsakis, 2, Georgios Savaidis, 2,               

1 International Hellenic University

2 Aristotle University Thessaloniki

Mode-I fatigue crack growth analysis based on crack tip cyclic strain hardening

Alexis Kermanidis, 1, Andreas Tzamtzis ,1,                   

1 Laboratory of Mechanics and Strength of Materials, Department of Mechanical Engineering, University of Thessaly

Cr free chemical stripping of anodic layers formed on aluminium alloys used in aerospace

Carmen Vladu, 1, Norica Godja ,1, Michael  Sinnabell, 1, Rene Wultsch, 1,               

1 CEST  - Center Of Electrochemical Surface Technology

Safety assessment for the power train integration of the hybrid-electric e-Genius HPH

Andreas Strohmayer 

IFB University of Stuttgart

12:10 pm-12:30 pm

An addition to the Local Strain Approach of the FKM guideline nonlinear for calculating the fracture fatigue life of steel components

Melanie Fiedler, 1, Michael Vormwald ,2,                   

1 Structural Durability Group, Technical University Dresden

2 Material Mechanics Group, Technical University Darmstadt

Influence of pre-straining on the fatigue crack growth rate of S355 and S460 structural steels

Christos Prosgolitis, 1, Alexis Kermanidis ,1, Spyros Karamanos, 1,                 

1 Laboratory of Mechanics and Strength of Materials, Department of Mechanical Engineering, University of Thessaly

Corrosion-induced hydrogen trapping and the effect of ageing treatment in Aluminum alloy 2024

Eleni Kamoutsi, 1, Gregory Haidemenopoulos ,1, Dalaver Anjum , 2, Thanasis Kefalas, 1, Charilaos  Karantonidis1, Panagiotis Floratos, 1,         

1 University Of Thessaly

2 Department of Physics, Khalifa University

On the Phenomenon of Impact

Stephan Kalapis, 1, Athanasios Dafnis ,1, Kai-Uwe Schröder, 1,                 

1 RWTH Aachen University

12:30 pm-12:50 pm

Buckling of simply supported GLARE cylindrical panels subjected to uniform compression

Costas Kalfountzos, 1, George Bikakis ,1, Efstathios Theotokoglou, 1,                 

1 National Technical University Of Athens

The effect of artificial ageing on the corrosion-induced mechanical properties degradation of aeronautical aluminum alloy 2198

Christina Margarita Charalampidou, 1, Foteini  Tazlakidou ,1, Angeliki  Proiou, 1, Stavros  Kourkoulis, 2, Nikolaos   Alexopoulos ,1,           

1 1Department of Financial Engineering, School of Engineering, University of the Aegean

2 Laboratory of Testing and Materials, Department of Mechanics, National Technical University of Athens

Organic dyes as corrosion inhibitors of commercial AA1050 aluminum alloy in sodium chloride environment

Paraskevi Pantazopoulou, 1, Stamatina Theohari ,2, Sofia Kalogeropoulou, 1,                 

1 Department of Electrical and Electronic Engineering,University Of West Attica

2 Graphic Design and Visual Communication Department, University of West Attica

Heat Shielded Unmanned Aerial Vehicle (UAV)

Mim Kabir, 1,                      

1 German University of Technology in Oman (GUtech)

12:50 pm-13:10 pm

Autofrettage of component-like ultra high Strength Steel Specimens with intersecting Holes

Carl Fällgren, 1, Heinz Thomas Beier ,1, Michael Vormwald, 1,                 

1 Technical University of Darmstadt, Department of Civil and Environmental Engineering Sciences, Materials Mechanics Group

The influence of exposed to corrosion length of rebars on fatigue life of RC elements

Konstantinos Koulouris, 1, Maria Basdeki ,1, Charis Apostolopoulos, 1,                 

1 Laboratory of Technology and Strength of Materals, University Of Patras

A Machine Learning Based Approach for Fast Impact Damage Analysis

Mirijam Bastek, 1, Ronny Sachse ,2, Peter Middendorf, 1,                 

1 University Of Stuttgart

2 Airbus Defence and Space

13:10 pm-14:10 pm

LUNCH

14:10 pm-14:40 pm

Keynote Lecture: Prof. Peter Middendorf, University of Stuttgart

Composite Simulation: How can Data Science and Enhanced Data Acquisition approaches improve design against failure?

14:40 pm-14:50 pm

Coffee Break

14:50 pm-16:30 pm

SESSION 21

Workshop on Properties and characterization of high strength materials and components for engineering applications

Chairpersons: Prof. Michael Vormwald - Prof. George Savaidis, Technische Universität of Darmstadt (TUDa) - Aristotle University of Thessaloniki

CONTINUED

SESSION 22

Modeling and Simulation of Aerospace Materials and Systems

Chairperson: Prof. Konstantinos Stamoulis, Amsterdam University

SESSION 23

Micro- and nano-mechanical characterization and modelling of advanced materials

Chairperson: Prof. Nikolaos Michailidis -  Prof. Georgios Maliaris, Aristotle University of Thessaloniki - International Hellenic University

SESSION 24

Validated simulation of novel materials and structures

Chairperson: Prof. George Lampeas, University of Patras

14:50 pm-15:10 pm

Influence of discontinuities on fatigue strength using the example of additively manufactured specimens made of AlSi10Mg


Thomas Beier, 1, Patrick Yadegari ,1, Michael Vormwald, 1,                 

1 Technische Universität Darmstadt

Energy Balance-Based Numerical Method for Turbine Blade Cooling Analysis during Preliminary Design of Aircraft Engines

Asteris Apostolidis, 1,                      

1 Cranfield University

The corrosion-fatigue performance of conventionally and additively manufactured Maraging steel after various surface and heat treatments

Apostolos Arvanitidis, 1,2, Emmanouil Bouzakis ,3, Fotis Kazelis, 1, Georgios Maliaris, 4, Nikolaos  Michailidis ,1,2,           

1 Aristotle University Of Thessaloniki

2 Center for Research & Development of Advanced Materials

3 German University of Technology

4 International Hellenic University

Development of a multipurpose test rig and validation of an innovative rotorcraft vertical tail
TAILTEST

Vaclav Horak, 1,                      

1 Vyzkumny a zkusebni letecky ustav, a.s.

15:10 pm-15:30 pm

Multiaxial Testing Bench for the Durability Assessment of High-Strength Automotive Axle Suspension Systems

Efstratios Giannakis, 1, Georgios Savaidis ,1,                   

1 Aristotle University Thessaloniki

A Health Monitoring Modelling Case Study: Humidity Effects on Engine Deterioration Prediction

Asteris Apostolidis, 1, Konstantinos Stamoulis ,2,                    

1 Air France-KLM

2 Amsterdam University of Applied Sciences

Experimental and FE – based analysis of the mechanical performance of high porosity gyroid lattices with thin walls.

Georgios Maliaris, 1, Nikolaos Michailidis ,2, Apostolos Argyros, 2,                 

1 International Hellenic University

2 Aristotle University Thessaloniki

Design of the multipurpose test rig

Martin  Oberthor, 1, Horák Horák ,1, Roman  Růžek                 

1 VZLU-Czech Aerospace Research Centre

15:30 pm-15:50 pm

Estimation of the fatigue strength of ultra-high strength steels

Patrick Yadegari, 1, Heinz Thomas Beier ,1, Michael Vormwald, 1,                  

1 Technical University of Darmstadt, Department of Civil and Environmental Engineering Sciences, Materials Mechanics Group

Αn evaluation of various damage models for thermoplastic composite materials subjected to quasi-static tensile loading

Ioannis Sioutis,1, Konstantinos Tserpes,1

1 University of Patras

Homogenization of Unidirectional Composites with Brittle Fracture Modeled by the Phase-Field Approach

Mert Atasoy, 1, Serdar Göktepe ,2, Altan Kayran, 1,                 

1 Department of Aerospace Engineering, Middle East Technical University

2 Department of Civil Engineering, Middle East Technical University

Development and validation of a cohesive zone-based numerical methodology for delamination prediction in laminated composite structures

Konstantinos Fotopoulos, 1, Harry Psihoyos ,1, George Lampeas, 1,                 

1 Athena Research Center, Industrial Systems Institute

15:50 pm-16:10 pm

Approximation of elastic-plastic local strains in surface-hardened notched components

Patrick Yadegari, 1, Teresa Schlitzer ,1, Michael Vormwald, 1,                 

1 Technical University of Darmstadt, Department of Civil and Environmental Engineering Sciences, Materials Mechanics Group

An Integrated Application of Sensors, Physical Failure Modeling and Data
Analytics to Enable Optimal Maintenance Strategies

Christiaan Schoemaker, 1, Konstantinos Stamoulis                     

1 Amsterdam University of Applied Sciences

Damage mechanisms appearing in a cross-ply composite  material under uniaxial tension: a mutliscale simulation study

Eleftherios Tsivolas, 1, Leonidas Gergidis ,1, Alkiviadis Paipetis, 1,                 

1 Dept. of Materials Science and Engineering, University of Ioannina

Thermomechanical Simulation of SLM process for Prediction of Residual Stress and Distortion Fields

Harry O. Psihoyos, 1, George N. Labeas ,1,                   

1 Laboratory of Technology and Strength of Materials, Mechanical Engineering and Aeronautics Department, University Of Patras

16:10 pm-16:30 pm

Characterization of surface integrity of shot-peened leaf springs by micro- and nano-indentation

Maria Pappa, 1, George Savaidis ,2, Nikolaos Michailidis, 1,                 

1 Physical Metallurgy Laboratory, Mechanical Engineering Department, School of Engineering, Aristotle University of Thessaloniki,

2 Laboratory of Machine Elements and Machine Design, Mechanical Engineering Department, School of Engineering, Aristotle University of Thessaloniki,

Progressive Failure Analysis of Laminated Fiber Reinforced Composite Materials

Harry O. Psihoyos, 1, Konstantinos T. Fotopoulos ,1, George N. Labeas, 1,                 

1 ATHENA RC/Industrial Systems Institute

16:30 pm-16:40 pm

Coffee Break

16:40 pm-18:20 pm

SESSION 25
 

Advanced composite materials with embedded capabilities

Chairperson: Prof. Leonidas Gergidis, University of Ioannina

SESSION 26

Innovative approaches for damage assessment in modern structural materials

Chairperson: Prof. Dionysios Mouzakis, Hellenic Army Academy

SESSION 27

Adhesive Bonding

Chairpersons: Prof. Konstantinos Tserpes - Mr. Kai Brune, University of Patras - Fraunhofer IFAM

SESSION 28

Green Tribology

Chairperson: Prof. Pantelis Nikolakopoulos, University of Patras

16:40 pm-17:00 pm

A Carbon Fiber-Reinforced Polymer Composite with Embedded Photo-Thermal Energy Harvesting Capabilities


Christos Mytafides, 1, George Karalis ,1, Lazaros Tzounis, 1, Alkiviadis Paipetis, 1, Nektaria  Barkoula ,1,           

1 Composite and Smart Materials Laboratory, Department of Materials Science and Engineering, University of Ioannina

Adding remote sensing capabilities in fibre reinforced polymer composites through magnetoelastic sensor integration by 3D printing

Dionysios Mouzakis,1,, Dimitrios Dimogianopoulos,1

1 Hellenic Army Academy

Laser induced breakdown spectroscopy (LIBS) for extended non-destructive testing (ENDT) – latest advancements and current research

Julian Heine, 1, Mareike Schlag ,1, Kai Brune, 1, Hauke Brüning, 1,               

1 Fraunhofer Institute for Manufacturing Technology and Advanced Materials

Optimal Designs of Tilting-Pad Thrust Bearing operation with the combination of numerical and machine learning techniques

Konstantinos Katsaros, 1, Pantelis  Nikolakopoulos G. ,1,                   

1 University Of Patras

17:00 pm-17:20 pm

The Integration of a CNT-based Organic Thermoelectric Generator within a Carbon Fiber Reinforced Polymer Composite


Christos Mytafides, 1, Lazaros Tzounis ,1, Kyriaki Tsirka, 1, George Karalis, 1, Lampros  Koutsotolis ,1, Eleftherios Lambrou, 1, Leonidas  Gergidis ,1, Alkiviadis  Paipetis ,1, 

1 Composite and Smart Materials Laboratory, Department of Materials Science and Engineering, University of Ioannina

Designing a knowledge management system for Naval Materials Failure Analysis

Nikolaos Melanitis, 1, George Giannakopoulos ,2, Konstantinos Stamatakis, 2, Dionysios Mouzakis, 3, Aggelos  Koutsomichalis ,4,           

1 Hellenic Naval Academy

2 Institute of Informatics and Telecommunications, NCSR "Demokritos"

3 Hellenic Army Academy

4 Hellenic Airforce Academy

Crack propagation simulation in adhesively bonded composite joints with a complex crack initiation.

Lukas Münch, 1, Ronny Sachse ,2, Peter Middendorf, 1,                 

1 University Of Stuttgart

2 AIRBUS Defence and Space GmbH

Cavitation shapes measurements in piston-rig lubrication and their link to lubricant properties

Polychronis Dellis

University of Patras 

17:20 pm-17:40 pm

Cement/ swcnt thermoelectric nanocomposites for potential large-scale thermal energy harvesting

Ioanna Vareli, 1, K. Garavela,1,  L. Tzounis, N.-M. Barkoula,1, A.S. Paipetis,1 

1 University Of Ioannina

Long Fibre Thermoplastic Composite Subjected to Impact: Experimental and Numerical Investigation

Panagiotis Charitidis

University of Thrace

Non Destructive Testing for contaminated surface inspection before bonding

Sara Kirchner, 1, Julian Heine ,2, Andreas Krenz, 2, Kai Brune, 2, Cécilia  Gestraud ,1, Julie Lecomte, 1, Laurent  Ferres ,1, Maxime  Péron ,1,3, Nicolas  Cuvillier ,1,4

1 IRT Saint Exupéry

2 Fraunhofer IFAM

3 ArianeGroup

4 Safran Composites

The effect of knocking combustion on a turbocharged diesel engine emissions and top compression ring friction


Anastasios Zavos, 1, Pantelis Nikolakopoulos ,2, Apostolos Pesyridis, 3, Alasdair Cairns, 4,               

1 Machine Design Laboratory, Department of Mechanical Engineering and Aeronautics, University of Patras

2 Machine Design Laboratory, Department of Mechanical Engineering and Aeronautics, University of Patras

3 Metapower Limited

4 University of Nottingham

17:40 pm-18:00 pm

On Lateral and Axial Crushing Response of Filament Winding GFRP and Modified GFRP Tubes

Lampros Koutsotolis, 1, Georgios Karalis ,1, Thomais Tiriakidou, 2, Lazaros Tzounis, 1, Kyriaki  Tsirka ,1, Christos Mytafides, 1, Alkiviadis  Paipetis ,1,     

1 Composite and Smart Materials Laboratory, Department of Materials Science and Engineering, University of Ioannina

2 B&T Composites

Small size 3D printed hydraulic components with integrated fluid sensing capabilities: A proof of concept

Chrysoula Manoli, 1,3, Nicholas R.  Hendricks ,2, Jerome  Noël, 1, Paolo Petagna, 1, Sébastien   Lani ,2, Dionysios Mouzakis, 3,         

1 CERN (Conseil Européen pour la Recherche Nucléaire)

2 CSEM (Centre Suisse d'Électronique et de Microtechnique)

3 Hellenic Army Academy

Numerical simulation of debonding of a composite-to-metal adhesive joint subjected to centrifugal load

Ioannis Sioutis, 1, Ioannis Floros,1,  Elli Moutsompegka,1, Konstantinos Tserpes, 1,               

1 University of Patras

Tensile and fatigue behaviour of Plasma Sprayed Titania and Chromia Coatings

Angelos  Koutsomichalis, 1, George  Loukas ,1, Michalis  Vardavoulias, 2, Antonios Lontos, 3, Nikolaos  Vaxevanidis ,4,            

1 Hellenic Air-Force Academy

2 Pyrogenesis S.A

3 Frederick University

4 School of Pedagogical & Technological Education (ASPETE)

18:00 pm-18:20 pm

The quasi-static crack growth and analysis of interlaminar fracture toughness of layered composite

Vitalijs Pavelko, 1, Igors Pavelko ,2,                   

1 Riga Technical University

2 Ogres Valsts gimnāzija

Influence of multiaxial cyclic loading on the fatigue behavior of defective friction stir welded joints

Ulises Alfaro Mercado, 1, Ulrike Dressler ,1, Eric Breitbarth, 1, Guillermo Requena, 1,               

1 German Aerospace Center (DLR)

18:20 pm

End of Day 2

09:00 am-09:30 am

Keynote Lecture: Prof. Nikolaos Michailidis, Aristotle University of Thessaloniki

Thermomechanical and corrosion fatigue of high temperature Shape Memory Alloys

09:30 am-09:40 am

Coffee Break

09:40 am-11:40 am

SESSION 29

Manufacturing Techniques and processes

Chairperson: Prof. Joel Andersson, University West  

SESSION 30

Kinetic and thermal deposition for additive manufacturing and coating

Chairpersons: Dr. Sara Bagherifard – Prof. Maro Guagliano Mario – Prof. Filippo Berto, Politechnico di Milano - Politechnico di Milano - NTNU Trondheim

SESSION 31

Surface engineering, coatings and adhesives

Chairperson: Prof. Vasileios Koutsos , University of Edinburgh

SESSION 32

Assessment of fatigue behavior and crack growth analysis

Chairperson: Prof. Paulo de Castro, University of Porto

09:40 am-10:00 am

Casting and solidification of magnesium alloys

Yuanding Huang, 1,                      

1 Helmholtz-Zentrum Geesthacht

Embedded Structural Health Monitoring through Surface Acoustic Wave Inspection Deployed on Capillaries Integrated in Additively Manufactured Components

Michaël Hinderdael, 1,                      

1 Vrije Universiteit Brussel

The contact mechanics and switchable adhesive properties of polyelectrolyte brushes

Mark Geoghegan, 1,                      

1 Newcastle University

INVITED TALK

Fatigue behaviour of a spring: a case study

Nuno Graça, 1,  Paulo de Castro, 1,                    

1 Universidade Do Porto

10:00 am- 10:20 am

Production and Characterization of dual scale Ti produced by powder metallurgy

Tamás Mikó, 1, Ádám Angel ,1, Ferenc Kristály, 2, Zoltán Gácsi, 1,               

1 University Of Miskolc,Institute of Physical Metallurgy, Metalforming and Nanotechnology

2 University Of Miskolc, Institute of Mineralogy and Geology

Experimental investigation on flexural properties of FDM-processed Pet-G specimen using response surface methodology

Nikolaos Fountas, 1, Ioannis Papantoniou ,2, John Kechagias, 3, Demetrios Manolakos, 2, Nikolaos  Vaxevanidis ,1,           

1 School Of Pedagogical And Technological Education (ASPETE))

2 National Technical University of Athens (NTUA)

3 University of Thessaly

An overview on nanoparticle reinforced lightweight metal composites

Qianqian Li, 1, Nur Syazana Natasha Binti Hisham ,1, Zhuocheng Xu, 1, Samaneh Nasiri, 2, Milo  Shaffer ,1, Michael Zaiser, 2,         

1 Imperial College London

2 University of Erlangen-Nuremberg

INVITED TALK

Fatigue strength evaluation of a 13%Cr supermartensitic stainless steel by the thermographic method

Sérgio Souto Maior Tavares, 1, Paulo-Pedro Kenedi ,2, Bruna Abib dos Santos, 2, Hugo Ribeiro da Igreja, 1, Brigida  Bastos de Almeida ,1,           

1 Universidade Federal Fluminense

2 Centro Federal de Educação Tecnológica - CEFET/RJ

10:20 am- 10:40 am

Investigation of Penetrator Defect Formation during High Frequency Induction Welding in Pipeline steels

Christos Sofras, 1,2, Marianthi Bouzouni ,3, Nikos Voudouris, 4, Spyros Papaefthymiou, 5,               

1 Laboratory for Neutron Scattering and Imaging (LNS), Paul Scherrer Institute

2 Ecole Polytechnique Federale de Lausanne

3 ELKEME S.A.

4 CPW S.A.

5 National Technical University of Athens

Influence of the material volume of a lattice structure on bending properties

Katarina Monkova, 1,2, Peter Pavol Monka ,1,2, Oldrich Suba, 2, Milan Zaludek, 2, Drazan  Kozak ,3, Jan Vanca, 1,         

1 TU Kosice, Faculty of manufacturing technologies

2 UTB in Zlin, Faculty of technology

3 Josip Juraj Strossmayer University of Osijek

Polymers on surfaces: structure, wetting and adhesion at the nanoscale

Vasileios Koutsos, 1,                      

1 The University of Edinburgh

Investigation on the influence of different testing methods and parameters on the determination of fatigue crack growth data

Larissa Mara Batista Duarte, 1, Uwe Zerbst ,1, Mauro Madia, 1,                 

1 Bundesanstalt für Materialforschung und -prüfung

10:40 am-11:00 am

Effects of shot peening on tribological and fatigue behaviour of LPBF AlSi10Mg

E. Maleki, 1, Sara Bagherifard ,1, O. Unal, 2, Mario Guagliano, 1,               

1 Department of Mechanical Engineering, Politecnico di Milano, Milano

2 Department of Mechanical Engineering, Karabuk University, Karabuk

Investigation of hardness behavior after carburizing and hardening of 15CrNi6 steel

 

Arsenios Dragatsis,1, Leonidas Fragkos-Livanios,1, Dimitris G. Papageorgiou,1, Carmen Medrea,1

1 University Of West Attica

Estimation of fatigue life for clinched joints with the Local Strain Approach incorporating the impact of cold forming to cyclic material properties

Boris Spak, 1,  Maximilian Schlicht ,2, Markus Kästner, 1, Melanie Fiedler, 1, Pascal  Froitzheim ,2, Wilko Flügge, 2,         

1 Chair of Computational and Experimental Solid Mechanics, TU Dresden

2 Fraunhofer Institute for Large Structures in Production Engineering IGP

11:00 am-11:20 am

Fabrication aspects of hot structural aero engine components

Joel Andersson 

University West  

INVITED TALK

Numerical Prediction of Residual Stress in Cold Spray Deposition for Additive Manufacturing and Repair in Tool Industries

Amir Ardeshiri Lordejani, 1, Sara Bagherifard ,1, Mario Guagliano, 1,                 

1 Department of Mechanical Engineering, Politecnico di Milano

Fatigue life evaluation of functional elements

David Kühne, 1, Christian Denkert ,1, Melanie Fiedler, 1, Dietmar Süße, 1, Markus  Kästner ,1, Maik Dörre, 1, Ralf  Glienke ,1,     

1 TU Dresden

11:20 am-11:40 am

11:40 am-11:50 am

Coffee Break

11:50 am-12:20 pm

Keynote Lecture: Prof. Xiaosu Yi, National Key Laboratory of Advanced Composites, AVIC Composites Center

How to Integrate Functionality into Structural Composites for Multifunctional Aerospace Application

12:20 pm-

13:20 pm

LUNCH

13:20 pm-15:00 pm

SESSION 33

Mini Workshop on Transition from traditional to ecofriendly structural materials: a multidisciplinary emerging issue

Chairperson: Dr. Claudio Mingazzini, ENEA

SESSION 34

Structural Integrity of materials processed by additive manufacturing technologies

Chairpersons: Dr. Amin Azar - Dr. Spyros Diplas, Stiftelsen for industriell og teknisk forskning  (SINTEF)

SESSION 35

Mini Workshop on Virtual and experimental testing methods for structural assessment of composite structures

Chairperson: Dr. Angelos Filippatos, Technische Universität Dresden

SESSION 36

Damage and failure investigation of structural components

Chairperson: Dr. Anna Zervaki, University of Thessaly

13:20 pm-13:40 pm

A holistic assessment of a stiffened panel production using a novel thermoplastic material and implementing the induction welding process

Christos Katsiropoulos, 1, Spiros Pantelakis ,1, Francesca Felline, 2, Giuseppe Buccoliero, 2, Silvio  Pappada ,2,           

1 LTSM/University of Patras

2 CETMA - Advanced Materials and Processes Consulting Department

Structural and magnetic performance of soft magnets based on FeCoNiMnAl additively manufactured high entropy alloys

Amin Azar, 1, Matthias Schrade ,1, Joachim Graff, 1, Espen Flage-Larsen, 1, Ole Martin  Løvvik ,1, Branson Belle, 1, Patricia  Carvalho ,1, Spyros  Diplas ,1, 

1 Sintef

Design approach for the development of a digital twin of a generic hybrid lightweight structure

Angelos Filippatos, 1, Moritz Kuhtz ,1, Minh Nguyen, 1, Tobias Ryll, 1, Maik  Gude ,1,           

1 Technische Universität Dresden, Institute of Lightweight Engineering and Polymer Technology

Practical Experience with the Methodology of Prediction of Corrosion-Fatigue Failures of Steam Turbine Rotating Blades

Josef Kasl, 1, Jan Lazar ,1, Miroslava Matějová, 1,                 

1 Research And Testing Institute Pilsen

13:40 pm -14:00 pm

Design of a bonnet of a sport vehicle realized with an innovative recyclable Polymeric Matrix Composite and Virtual characterization of the related structural sandwiches reinforce.

Matteo Basso, 1, Claudio Mingazzini ,2, Matteo Scafè, 2, Enrico Leoni, 2, Enrico  Benco ,3, Rafael Garcia-Etxabe, 4, Koldo   Gondra ,4, Daniele  Pullini ,1, 

1 STELLANTIS-Materials Engineering Methods & Tools (CRF)

2 ENEA SSPT-PROMAS-TEMAF

3 GS4C srl.

4 GAIKER Technology Centre, Basque Research and Technology Alliance (BRTA)

Additively Manufactured FeCoNi(AlMn)x High Entropy Alloys: Mechanical and Magnetic Properties Investigation

Anthoula Poulia, 1, Amin Shahrestani Azar ,2, Calliope Bazioti, 1, Anette Eleonora  Gunnæs , 1, Pavlo  Mikheenko1, Spyros Diplas, 2,         

1 University Of Oslo

2 SINTEF Industry

Comparison and combination of dynamic optical measurement systems for in-situ structural assessment of high-speed composite rotors

Angelos Filippatos, 1, Julian Lich ,2, Tino Wollmann, 1, Christian Schnabel, 3, Robert  Kuschmierz ,2, Edmund Koch, 3, Jürgen  Czarske ,2, Maik  Gude ,1, 

1 Technische Universität Dresden, Institute of Lightweight Engineering and Polymer Technology (ILK)

2 Technische Universität Dresden, Laboratory for Measurement and Sensor System Techniques (MST)

3 Technische Universität Dresden, Faculty of Medicine, Clinical Sensoring and Monitoring (KSM)

Damage and failure evaluation of diamond wire for multi-wire sawing of hard stone blocks through modeling and numerical simulation

Daniel Gomes, 1, Andreia  Araujo ,1, Rui  Marques, 1, Raquel M. Santos, 1,2,               

1 Institute of Science and Innovation in Mechanical and Industrial Engineering (INEGI), Materials and Composite Structures unit

2 Associated Laboratory of Energy, Transports and Aeronautics (LAETA), Faculty of Engineering, Porto University

14:00 pm-

14:20 pm

Development of recyclable Fiber Metal Laminates (FMLs), their mechanical characterization and FE modelling, aiming at application to structural aeronautic components

Stefano Bassi, 1, Matteo Scafè ,2, Enrico Leoni, 2, Claudio Mingazzini, 2, Bhatia  Narayan ,3, Andrea Rossi, 3,         

1 CNR ISTEC

2 ENEA SSPT-PROMAS-TEMAF

3 Consorzio MUSP

Advanced Scanning Transmission Electron Microscopy investigations of FeCoNi(AlMn)x high-entropy alloy: nanoscale structure and impact on magnetic properties

Calliope Bazioti, 1, Anthoula Poulia ,1, Ole Martin Løvvik, 2, Amin Azar, 2, Pavlo  Mikheenko1, Spyros Diplas, 2, Anette Eleonora  Gunnæs ,1,     

1 University of Oslo

2 SINTEF

Verification and application of bird strike analysis for the design of high-speed helicopter composite cowlings

Radek Doubrava, 1, Martin Oberthor ,1, Petr Bělský, 1, Bohuslav Cabrnoch, 1,               

1 Výzkumný a zkušební letecký ústav, a.s.

The effect of ball milling on the mechanical properties of Mo-Cu alloys reinforced with Al2O3 particles

Dániel Pethő, 1, Tamás Kurusta ,2, Tamás Mikó, 1, Ferenc Kristály, 3, Zoltán  Gácsi ,1,           

1 University of Miskolc, Institute of Physical Metallurgy, Metalforming and Nanotechnology

2 Hungary, University of Miskolc, Institute of Raw Material Preparation and Environmental Processing

3 Hungary, University of Miskolc, Institute of Mineralogy and Geology

14:20 pm -14:40 pm

Characterisations in expected working environments of recyclable fire resistant materials

Giulia De Aloysio, 1, Mattia Morganti ,1, Luca Laghi, 1, Matteo  Scafè, 2, Enrico  Leoni ,2, Claudio Mingazzini, 2, Stefano  Bassi ,3,     

1 CertiMaC

2 ENEA SSPT-PROMAS-TEMAF

3 ISTEC-CNR

A novel approach for alloy design and composition screening for additive manufacturing

Magnus Reiersen, 1, Spyros Diplas ,2, Anette Gunnæs, 1, Mohammed M'hamdi, 2, Qiang  Du ,2, Amin S. Azar, 2,         

1 University of Oslo (UiO)

2 SINTEF Industry

Experimental testing of polyether ether ketone (PEEK) under vibration-induced heating

Michael Kucher, 1, Martin Dannemann ,1, Niels Modler, 1,                 

1 Institute Of Lightweight Engineering And Polymer Technology (ILK), Technische Universität Dresden

Behavior of constitutive models from fatigue test of maraging 300 and 350 steels

Andreia De Souza Martins Cardoso, 1, Rodrigo Chales ,1, Hugo Ribeiro Igreja, 1, Pedro Soucasaux Pires Garcia, 1, Juan  Manoel Pardal ,1, Sérgio Souto Maior Tavares, 1, Maria  Margareth Da Silva ,2,     

1 Universidade Federal Fluminense

2 Instituto Tecnológico De Aeronáutica

14:40 pm-15:00 pm

Design and characterization of lightweight green composites obtained from natural resources for high-performance use in transport structures

Gianluca Viscusi, 1,                      

1 University Of Salerno

Thermomechanical and microstructural simulation of the AM process of 316L austenitic stainless steel

Marios Sotiriou,1, Ioanna Papadioti,1, John Aristeidakis,1, Margianna Tzini,1, Nick Aravas,1, Gregory Haidemenopoulos,1

1 University of Thessaly

15:00 pm -15:10 pm

Coffee Break

15:10 pm-16:50 pm

SESSION 37

Mini Workshop on Transition from traditional to ecofriendly structural materials: a multidisciplinary emerging issue

Chairperson: Dr. Claudio Mingazzini, ENEA

SESSION 38

Surface Engineering against Failure

Chairperson: Prof. Mario Guagliano, Politechnico di Milano

SESSION 39

Mini Workshop on Virtual and experimental testing methods for structural assessment of composite structures

Chairperson: Dr. Angelos Filippatos, Technische Universität Dresden

CONTINUED

SESSION 40

Mechanical behavior and damage of reinforcing steel bars

Chairperson: Dr. Eleni Kamoutsi, University of Thessaly

15:10 pm-15:30 pm

Investigation of Thermophysical and Thermomechanical Properties of Highly Porous SiC for Solar Receivers in CSP Plants

Giulia De Aloysio, 1, Luca  Laghi ,1, Giuseppe Magnani, 2, Claudio Mingazzini, 2, Antonio   Rinaldi ,3, Matteo Scafè, 2, Paride   Fabbri ,2, Inmaculada  Cañadas Martínez ,4, Victor Manuel  Candelario Leal ,5

1 CertiMaC

2 ENEA SSPT-PROMAS-TEMAF

3 ENEA SSPT

4 Solar Concentrating Systems Unit CIEMAT-Plataforma Solar de Almería

5 LiqTech Ceramics A/S     

Modern Tribological Trends in the Rolling-elements Bearing's Industry in Terms of Materials, Heat Treatments & Coatings

Pierre Dupont, 1,                      

1 ASM International - Failure Analysis Society

Experimental-numerical validation of the curing reaction of snap-cure polymer systems for component families of small batch sizes and high diversity

Rafal Stanik, 1, Sirko Geller ,1, Michael  Müller, 1, Albert Langkamp, 1, Maik  Gude ,1, Andreas Gruhl, 2, Henrik  Antonowitz ,2, Alexander  Knorr ,3, 

1 Technische Universität Dresden

2 Leichtbau-Zentrum Sachsen GmbH

3 Elbe Flugzeugwerke GmbH

Preliminary examination of a tool used for sectioning steel reinforced concrete pillars

Vassilis Βelimpasakis,1, Dimitrios Papageorgiou,1, Carmen Medrea,1

1 University of West Attica

15:30 pm -15:50 pm

Nanostructured inorganic polymer matrices for high temperature resistant fiber reinforced composites

Annalisa Natali Murri, 1, Elena Landi ,1, Emanuele Apollo, 2, Cristiano Bordignon, 2, Claudio  Mingazzini ,3, Matteo Scafè, 3, Valentina  Medri ,1,     

1 CNR-ISTEC

2 Aeronautical Service S.r.l.

3 ENEA-TEMAF

INVITED TALK

Alumina-Forming Austenitic (AFA) steels and aluminium-based coating on 15-15 Ti steel to limit mechanical damage in presence of liquid lead-bismuth eutectic and liquid lead.

Ingrid Proriol Serre, 1, Ines Ponsot ,1, Jean-Bernard Vogt, 1,                 

1 Univ. Lille, CNRS, INRAE, Centrale Lille, UMR 8207—UMET—Unité Matériaux Et Transformations

System reliability as a key for ecological and sustainable products

Leonhard Heindel, 1, Peter Hantschke ,1, Gordon Just, 1, Karsten Tittmann, 1, Ilja  Koch ,1, Maik Gude, 1, Markus  Kästner ,1,     

1 Technische Universität Dresden

The Influence of Concrete Cracks on the Chloride Penetration and Corrosion Damage of RC Elements in the Short Term

George Konstantopoulos, 1, Charis  Alk. Apostolopoulos ,1, Vagelis G. Papadakis, 2,                  

1 Department of Mechanical Engineering and Aeronautics, University of Patras

2 Department of Environmental Engineering, University of Patras

15:50 pm -16:10 pm

A holistic End-of-Life (EoL) Index for the quantitative impact assessment of CFRP waste recycling techniques

Dionysios Markatos,1, Christos Katsiropoulos,1, Spiros Pantelakis,1

1 University of Patras

How can we successfully study tribological failures on the lab-scale?

Emmanuel Georgiou, 1, Dirk Drees ,1, Tom Van Der Donck, 2, Angelos  Koutsomichalis, 3, Jean-Pierre  Celis ,2,            

1 Falex Tribology

2 KU Leuven

3  Hellenic Air-Force Academy

Numerical Evaluations of Strain Field Modification Induced by Production Flaws in Loaded Composite Structures

Jan Raska, 1, Jarmil Vlach ,1, Jan Horňas, 1,                 

1 Czech Aerospace Research Centre - VZLU

Mechanical behavior of steel reinforcement before and after flame spray coating in marine environment

Konstantinos Koulouris, 1, Maria Basdeki ,1, Charis Apostolopoulos, 1,                  

1 Laboratory of Technology and Strength of Materals, University Of Patras

16:10 pm -16:30 pm

Numerical Modeling of the Low Cycle Fatigue: Effect of Manufacturing Imperfections Caused by Machining Process

Ikram Abarkan, 1, Abdellatif  Khamlichi2, Rabee  Shamass , 3,                 

1 Department of Physics, Faculty of Sciences, Abdelmalek Essaadi University

2 Department of Industrial and Civil Sciences and Technologies, National School of Applied Sciences, Abdelmalek Essaadi University

3 Division of Civil and Building Services Engineering, School of Build Environment and Architecture, London South Bank University

Modelling and analysis of undulations and their influence on fiber-parallel compressive strength in unidirectional fiber-reinforced composites

Tom Blümel, 1,                      

1 Technische Universität Berlin

16:30 pm -16:50 pm

Investigation on the interfacial properties the CNF/CNT sized carbon fibre reinforced composite using a push-out method via a nano-indentation technique

Zhenxue Zhang, 1, Xiaoying Li ,1, Hanshan Dong, 1, Simon Jestin, 2, Aikaterini Flora    Trompeta ,3, Andreia Araújo, 4, Costas  Charitidis ,3,     

1 The University Of Birmingham

2 ADERA-CANOE

3 National Technical University of Athens

4 INEGI

Reliability Design of Mechanical Systems Subject to Repetitive Stresses

Seongwoo Woo, 1,                      

1 Addis Ababa Science And Technology University

16:50 pm 17:00 pm

Concluding remarks and closing of the Conference

17:00 pm

End of Conference

POSTER SESSION

No

Title

1

Quality improvement through process and learning approach in failure investigation and root-cause analysis

George Pantazopoulos

2

Microstructure properties relationship in low carbon microalloyed steel bars

Alexandros Antonopoulos, Athanasios Vazdirvanidis, Theofani Tzevelekou, George Pantazopoulos,  Panagiotis  Sismanis, Professor  Spyros Papaefthymiou

3

Hardness behavior of W. Nr. 1.7709 steel, oil quenched and tempered between 475oC and 575oC

 John Mantzoukas,  Dimitris G.  Papageorgiou,  Carmen Medrea,  Constantinos Stergiou

4

Assessment and rehabilitation of a deteriorated heat pipeline overpass

 Marta Lutomirska,  Tomasz Lutomirski

5

Repair of local damages to precast prestressed slab elements at a parking garage

 Marta Lutomirska,  Tomasz Lutomirski,  Artur Sakowski

6

Historical buildings prevention of failure by technical condition testing and revitalization

 Janusz Krentowski,  Piotr Knyziak

7

Methodology of testing and strengthening endangered roof structures by suspending

 Janusz Krentowski,  Tadeusz Chyzy,  Piotr Knyziak,  Robert Kowalski

8

Preventing damage to the reinforced concrete cylindrical shells due to temperature load

 Romuald Szeląg

9

Monitoring of large-panel residential buildings elevations for prevention of failure

 Piotr Knyziak,  Marcin Kanoniczak,  Janusz Krentowski

10

Disproportionately wide range of fire in a RC building during construction stage

 Piotr Knyziak,  Robert  Kowalski,  Michał  Głowacki,  Janusz Krentowski

11

Consequences of excessive deformation of structural elements in large-panel buildings

 Janusz R. Krentowski,  Monika Mackiewicz,  Piotr Knyziak,  Maciej Wardach

12

Methods of condition assessing of incomplete or temporarily out of service facilities

 Maciej Wardach,  Janusz Krentowski,  Monika Mackiewicz

13

Experimental and computational verification of precast large panel wall stiffness

 Maciej Wardach,  Janusz Krentowski,  Monika Mackiewicz

14

Identification of defects in the eighteenth-century buildings in terms of their revitalization

 Monika Mackiewicz,  Janusz Ryszard Krentowski,  Kamil Zimiński

15

Development of a Machine Learning Approach to Estimate In Vivo Properties of the Aorta and Better Understand Aortic Shape Variation

 Janet Kang,  Kameel Khabaz,  Karen Yuan,  Nhung Nguyen,  Luka Pocivavsek

16

Non-destructive Inspection of Composite Aileron during Fatigue Test

 Michal Podstawka,  Vladimir Snop,  Kristyna Kutiova

17

Propagation of the destruction stage of the ash tank structure during operation

 Romuald Szeląg

18

Structural Integrity and Thermomechanical Response of

Fe3O4/Carbon Nanotubes/Epoxy Resin Hybrid Nanocomposites

 Sevasti Gioti,  Aikaterini Sanida,  Anastasios C. Patsidis,  Georgios C. Psarras

19

Epoxy Based Composites for Electromagnetic Applications:

Probing their Mechanical Properties

 Sevasti Gioti,  Garoufalia Tzaferi,  G.-P. Tsouvaltzi,  A.C. Patsidis,  G.C. Psarras

20

Effect of Impact Modifiers on Strength and Fracture Toughness of CFRPs

Semitekolos D, Asimakopoulos I, Kontiza A, Dragatogiannis D, Charitidis C

21

Evaluation of the effect of uncertainty in the strengths of composite materials on the efficiency of failure criteria using interval analysis

 Konstantinos Tserpes,  Dimitris Sotiropoulos